Marley Eternit-Rivendale Fibre Cement Slate.


The Rivendale fibre cement roof slate features a riven surface and dressed edge, combining the benefits of modern slate technology with the look of natural slate.


  • Can achieve an BES 6001 ‘Very Good’ rating
  • Full roof system
  • Can be used for both roof and facade
  • Fibre cement is a 100% recyclable building material
  • Low carbon footprint of 13 CO2e/m2

Technical information: 

  • Size of Tile: 600mm x 300mm
  • Minimum Pitch:
  • -100mm lap
  • -Moderate exposure 22.5°
  • -Severe exposure 25°
  • -110mm lap
  • -Moderate exposure 20°
  • -Severe exposure 22.5°
  • Maximum Pitch:  90°
  • Minimum Headlap:  Typical laps 100mm, 110mm
  • Maximum Gauge:  245-250mm
  • Covering Capacity:  (net slates /m²) 13.4 at 100mm lap;  13.6 at 110mm lap
  • Weight of Tiling:  (approx. kg/m²) 100mm lap  20.4 (0.20 kN/m²);  110mm lap  20.9 (0.20 kN/m²)
  • Battens Required:  (net lin.m/m²) 4.00 at 100mm lap;  4.08 at 110mm lap
  • Batten Size Recommended:  (fixed to BS 5534) 38 x 25mm for rafters/supports not exceeding 450mm centres;  50 x 25mm for rafters/supports not exceeding 600mm centres
  • Tile Nails:  30mm x 2.65mm
  • Copper disc rivets:  Required
  • Fixing clips:  14 gauge self sealing screws
  • Authority:  BS EN 492

Colours available:

How do I buy?

If you’d like to buy this product, please call your local Skyline Roofing branch. Click below to see which one of our stores is close to your location:

Find your nearest branch